Comdial ExecuTech 0616 Series User Manual

Executech LCD Speakerphone This user guide is applicable for the following system models: l 14328 Rev F and later l K2232C Rev C and la

(continued from previous page) NOTE: Voice calling can be blocked. See the discus- sion titled, Voice Signal Blocking for details. To

Transferring Calls Screened transfer, 0 Answer call. 0 Press TRANS/CONF. (Call is placed on hold automatically.) 0 Dial extension number

Conference Calls Multiline conference (2 external parties, 1 internal party) To set up a multiline conference, 0 Establish first outsid

The Features Redialing Saved Number Redial The last number dialed can be saved for later redial at any time. To save a number just

Automatic Redial The last number previously dialed can be redialed repeatedly. 0 Press # #. (If on line listening to dial tone, pr

(contiued from previous page) 0 Press 0 for none. (When 0 is stored and automatic dial- ing is used, system will pick line assigne

To automatically dial numbers, Q Press desired memory key. Or If desired memory key is also programmed for one-key intercom calling, 0

Automatic Hold (only available at designated telephones) This feature allows a user to move from line to line without having to press

Area Paging (requires external paging unit) 0 Press line key dedicated to paging. Or 0 Lift handset. Cl Press ITCM. 0 Dial paging ac

Mute On hook operation To prevent other party from hearing while using speakerphone, 0 Press MUTE. Monitor light will flash. RESULTS:

Message Waiting The message waiting (MW) light, located above the HOLD key, is controlled by designated telephones or one central mes

To cancel call forward, 0 Press ITCM. 0 Dial 55. NOTE: For each call received during call forward, a ring reminder (short tone bur

Call Messaging Display A message can be set at any other Executech telephone which an Executech LCD Speakerphone will receive. Two s

Message 2 - shows number where telephone user can be reached (ysed with Call Forward feature,) To turn on message, 0 Press ITCM. 0

Line Queuing A telephone can wait in line (queue) for the availability of a line or line group To queue for busy outside line, 0

Call Park A call can be placed in system storage for retrieval at any telephone in the system. To park a call, 0 Press ITCM (call

To cancel call waiting tone, 0 Hang up handset. Clock/Calendar Display Whenever a telephone is idle, the display shows the day of th

Display Summary WHEN DISPLAYED Desk Clock Calendar During telephone idle state. NOTE Date and time is set by at- tendant as part of sy

Hold Recall Feature When a timed hold recall oc- .,. ..,.,.,...,.. .._...,... ~~~~~iii:8~~~~ii~~~ curs, display shows line being ,.,.i

rDo Not Disturb Disblav shows when feature is 1 active: When intercom call is received at DND telephone, dis- play shows extension n

Table Of Contents

Glossary Of Terms A All-call and zone paging: Station can receive voice announcements through the telephone speaker. Area paging: Diali

D E I L M Call waiting tones: A signal can be sent to a busy telephone indicating that a call is waiting. Direct telephone selection/

P Personal ringing tones: A telephone can be ar- ranged to ring in one of four distinctive tone. Prime line: A line designated to

4

Introduction This Executech LCD Speakerphone provides the user with a Liquid Crystal Display (LCD) in addition to the many standard a

The Basics Placing A Call 0 Press line key to select line. Or 0 If line groups are provided, press ITCM then dial access code for

When party answers, a Speak toward telephone or lift handset for private con- versation To return to speakerphone from handset, 0 Pre

,continued from previous page) line key reserved for that purpose when it is answered. (if this feature is programmed). RESULTS: Displ

Voice Calling 0 Lift handset. 0 Press ITCM. 0 Dial extension number. (To call system operator, dial 0.) RESULTS: Display will show