Comdial 8024S Specifications download pdf (Page 126)

100

101

3.3.4 Defaulting The Stations

Description: Returns the station configuration features to factory settings.

To Program: 1. Press INTERCOM, dial ✳ # 746✳. “CONFIG. MODE”

2. Dial 50. “STATION DEFAULT”

3. Dial 00 to default station ports system-wide

—OR—

select individual station port to be defaulted:

— Station 10–57 = Dial 10–57.

4. Dial ✳ for next station to default

—OR—

dial ✳✳for configuration mode or SPEAKER to quit.

3.3.5 Defaulting The Button Assignments

Description: Returns the button mapping of individual stations to its factory setting.

To Program: 1. Press INTERCOM, dial ✳ # 746✳. “CONFIG. MODE”

2. Dial 56. “BUTTON MAPPING”

3. Dial 01. “BUTTON DEFAULT”

4. Select station ports to be defaulted

—Station 10–57 = Dial 10–57.

5. Dial ✳ for next button mapping feature

—OR—

dial ✳✳for configuration mode or SPEAKER to quit.

3.3.6 Defaulting The Toll Restriction Tables

Description: The system defaults two toll restriction tables with preprogrammed values and assigns

them to the lines. You need only to assign them the stations to put them into effect. The

preprogrammed values are as follows:

Table 1 (deny) Table 2 (allow)

Entry 1 = 1 Entry 1= 1800

Entry 2 = 976 Entry 2 = 911

Entry 3 = 411

Entry 4 = 0

These values will provide satisfactory system performance in a broad range of site

applications; however, they can be changed as needed to meet different toll restriction

needs.

To Program: 1. Dial 70 “DEFAULT TOLL”

2. Press # to default toll tables

3. Dial ✳ for configuration mode or SPEAKER to quit.

Digital Telephone System IMI66–107

3 – 14 System Programming

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 437 438

Comments to this Manuals

No comments

Comdial 8024S Specifications Page 126

Comments to this Manuals