Comdial 8024S Specifications download pdf (Page 244)

3.17 Specialized Route Access (SRA)

The SRA feature allows the system to select a line group based on the digits the user has dialed. By doing

this, it matches calls with their ideal routes. The feature provides a table-driven routing scheme where the

numbers the users dial cause the system to chose a line group after comparing the dialed number with

entries in an office code table, and area code table or, four special area code tables.

You should make a record in Chapter 4 of all programming decisions that you make—it will help you

keep track of what you have done and will help you troubleshoot any problem that might arise later.

CAUTION

You can only program the SRA feature from the VDT and not from station 10.

Use your VDT to program for the specialized route access (SRA) feature.

Line group dialing codes 81, 82, and 83 do not provide access to the SRA feature, but they could provide

a means of bypassing SRA, allowing users access to line groups outside of the specialized routing

process. To ensure that the system routes all calls through SRA, use the feature inhibit programming

procedure described in section 3.17.7 to inhibit dialing codes 81, 82, 83.

The first step in the VDT programming sequence is to enter password. Do this by typing I✳746✳. Once

in the programming mode, type a selection number from the main menu and follow the screen prompts to

complete your programming requirements.

3.17.1 Enable The SRA Feature

Description: When you enable the SRA feature, you must first clear all assigned prime line, idle line

preference, and direct line appearance to inhibit all direct line access for the system

stations, and you must assign lines to the line groups the system will use.

To Program: 1. Type I ✳ 746✳and press RETURN.

2. From the main menu, type 1 and press RETURN for system COS menu.

3. From the system COS menu, type 16 for specialized route access menu

and press RETURN.

4. From specialized route access menu, type 1 for SRA feature

and press RETURN.

5. Type 1 to enable or type 0 to disable SRA feature and press RETURN.

6. To return to the main menu, press and hold CTRL and type C.

Digital Telephone System IMI66–107

3 – 132 System Programming

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 437 438

No comments

Comdial 8024S Specifications Page 244