Comdial 8024S Specifications Page 41
- Page / 438
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Be sure that all of the ground connections are without splices and are visible for inspection and
maintenance. Tag all of the ground connections with a sign that reads: Do Not Remove Or
Disconnect.
If you install expansion modules on the base cabinet, attach at least a #10 or #12 insulated, solid
copper wire between the frame ground stud on the expansion module(s) to the frame ground stud
on the base cabinet.
Remember, if spare conductors exist in the cables that run between the stations and the 66M-xx
connector blocks, it is good practice to connect them to earth ground. Doing this may help
prevent them from introducing radio frequency and/or AC interference into the system. Also
remember that it is good practice to disconnect any unused station jacks from the connector
block and ground that wiring to earth ground as well.
Figure 2–3: Grounding The System
IMI66–107 Digital Telephone System
Installing The DSU 2 – 11
- Digital Telephone System 1
- System Manual 1
- Printed in U.S.A. GCA47-157 2
- System Hardware And 3
- Software Instructions 3
- Telephone 3
- ISO 9001 4
- Introducing The 5
- 1.1 Using This Manual 6
- Introducing The DSU 1 – 3 7
- 1 – 4 Introducing The DSU 8
- 1.3 Accessory Information 9
- 1 – 6 Introducing The DSU 10
- 1.4 Hardware Summary 11
- 1 – 8 Introducing The DSU 12
- Introducing The DSU 1 – 9 13
- 1.6 Station Descriptions 14
- Introducing The DSU 1 – 11 15
- 1 – 12 Introducing The DSU 16
- Introducing The DSU 1 – 13 17
- 1 – 14 Introducing The DSU 18
- Introducing The DSU 1 – 15 19
- 1 – 16 Introducing The DSU 20
- And DigiTech Telephones 21
- Introducing The DSU 1 – 17 21
- Figure 1–10: 22
- Impression Telephones 22
- 1 – 18 Introducing The DSU 22
- 1.7 General Specifications 23
- 1 – 20 Introducing The DSU 24
- Music Interface 25
- Central Office Limits 25
- Industry/Regulatory Standards 25
- 1.7.1 Feature Codes 26
- 1 – 22 Introducing The DSU 26
- Introducing The DSU 1 – 23 27
- 1.7.2 System Ringing Patterns 28
- 1 – 24 Introducing The DSU 28
- 1.8 Seeking Repair Assistance 29
- Installing The 31
- 2 – 2 Installing The DSU 32
- Installing The DSU 2 – 3 33
- 2.1 Mounting Considerations 34
- FCC Registration Numbers 35
- 2.2 Mounting The Cabinet 36
- Installing The DSU 2 – 7 37
- 2.3.1 Identifying The Fuses 38
- 2 – 8 Installing The DSU 38
- Installing The DSU 2 – 9 39
- 2.3.2 Grounding The System 40
- 2 – 10 Installing The DSU 40
- Installing The DSU 2 – 11 41
- 2.4 Connecting The Lines 42
- Installing The DSU 2 – 13 43
- 2.4.1 Line Connection Details 44
- 2.4.3 Protecting The Lines 44
- 2 – 14 Installing The DSU 44
- Installing The DSU 2 – 15 45
- 2.5 Connecting The Stations 46
- 2.5.1 Grounding The Stations 47
- 2.5.2 Relocating The Stations 47
- Installing The DSU 2 – 17 47
- 2 – 18 Installing The DSU 48
- Installing The DSU 2 – 19 49
- 2 – 20 Installing The DSU 50
- Installing The DSU 2 – 21 51
- 2 – 22 Installing The DSU 52
- Housing On Model 77nnn 53
- Telephones 53
- 2 – 24 Installing The DSU 54
- Installing The DSU 2 – 25 55
- 2 – 26 Installing The DSU 56
- Installing The DSU 2 – 27 57
- 2 – 28 Installing The DSU 58
- Installing The DSU 2 – 29 59
- 2 – 30 Installing The DSU 60
- Installing The DSU 2 – 31 61
- 2 – 32 Installing The DSU 62
- 2.11 Using A Line Port As An 63
- 2.12 Connecting Data Devices 64
- Installing The DSU 2 – 35 65
- 2 – 36 Installing The DSU 66
- Installing The DSU 2 – 37 67
- 2 – 38 Installing The DSU 68
- Installing The DSU 2 – 39 69
- 2 – 40 Installing The DSU 70
- Installing The DSU 2 – 41 71
- 2.14.1 Expansion Capabilities 72
- 2 – 42 Installing The DSU 72
- Installing The DSU 2 – 43 73
- 2 – 44 Installing The DSU 74
- Installing The DSU 2 – 45 75
- 2 – 46 Installing The DSU 76
- Installing The DSU 2 – 47 77
- 2 – 48 Installing The DSU 78
- Installing The DSU 2 – 49 79
- 2 – 50 Installing The DSU 80
- 2.16.2 Checking The Voltage 81
- Installing The DSU 2 – 51 81
- 2 – 52 Installing The DSU 82
- 2.17 Isolating Failures 83
- 2 – 54 Installing The DSU 84
- Installing The DSU 2 – 55 85
- 2 – 56 Installing The DSU 86
- Installing The DSU 2 – 57 87
- 2 – 58 Installing The DSU 88
- Installing The DSU 2 – 59 89
- 2 – 60 Installing The DSU 90
- Installing The DSU 2 – 61 91
- 2 – 62 Installing The DSU 92
- Installing The DSU 2 – 63 93
- 2 – 64 Installing The DSU 94
- Installing The DSU 2 – 65 95
- 2 – 66 Installing The DSU 96
- Installing The DSU 2 – 67 97
- 2 – 68 Installing The DSU 98
- Installing The DSU 2 – 69 99
- 2 – 70 Installing The DSU 100
- Installing The DSU 2 – 71 101
- 2 – 72 Installing The DSU 102
- CID08 Units 103
- Installing The DSU 2 – 73 103
- 2 – 74 Installing The DSU 104
- Installing The DSU 2 – 75 105
- 2 – 76 Installing The DSU 106
- Installing The DSU 2 – 77 107
- 2.21 Supporting DVA Operation 108
- Installing The DSU 2 – 79 109
- Installing The DSU 2 – 81 111
- Programming The System 113
- 3 – 2 System Programming 114
- System Programming 3 – 3 115
- 3 – 4 System Programming 116
- System Programming 3 – 5 117
- 3 – 6 System Programming 118
- 3.1 Using Chapter Three 119
- 3 – 8 System Programming 120
- System Programming 3 – 9 121
- 3 – 10 System Programming 122
- 3.2.5 Using Block Programming 123
- System Programming 3 – 11 123
- 3 – 12 System Programming 124
- 3.3.2 Defaulting The System 125
- 3.3.3 Defaulting The Lines 125
- 3.3.4 Defaulting The Stations 126
- System Programming 3 – 15 127
- 3 – 16 System Programming 128
- 3.4 System Features 129
- 3.4.2 Data Baud Rate 130
- 3.4.3 Do Not Disturb (DND) 131
- 3.4.4 Exclusive Hold 132
- 3.4.5 Music On Hold 132
- 3.4.6 LCD Messaging 133
- 3 – 22 System Programming 134
- 3.4.7 PA Port Options 135
- Ringing Relay Tracking 136
- Ringing Tones 136
- 3.4.8 Station Monitoring 137
- 3.4.9 System Alarm Reporting 138
- 3.4.10 System Clock 139
- 3.4.11 System Speed Dial 140
- System Programming 3 – 29 141
- 3.4.12 Tandem Attendant 142
- ✳ for next item 143
- ✳✳for configuration mode 143
- 3.5.1 Call Park Recall Time 144
- System Programming 3 – 33 145
- 3.5.3 Pause Time 146
- 3.5.4 Recall/Flash 146
- 3.5.5 Timed Hold Recall 147
- 3 – 36 System Programming 148
- 3.6.1 Abandoned Hold Release 149
- 3.6.2 Automatic Privacy 150
- 3.6.3 Line Disable 151
- 3.6.4 Line Groups 151
- 3.6.5 Line Names 152
- System Programming 3 – 41 153
- 3.6.6 Line Port Functions 154
- # to make assignment 155
- 3.6.8 Pulse/Tone Switchable 156
- 3.6.9 Block Programming 157
- 3 – 46 System Programming 158
- 3.7 Station Features 159
- 3.7.1 Access Denied 160
- System Programming 3 – 49 161
- 3 – 50 System Programming 162
- 3.7.3 Audible Monitoring 163
- 3.7.4 Automatic Hold 164
- 3.7.5 Automatic Privacy 165
- Enable Call Forwarding 166
- Intercom Hunt Group 167
- 3.7.7 Call Origination Denied 168
- 3.7.8 Central Message Desk 168
- 3.7.9 Data Security Port 169
- 3.7.10 Dual Console Feature 169
- 3.7.11 Executive Override 170
- Direct/Delayed Ringing 171
- 3 – 60 System Programming 172
- Delayed Ringing Times 173
- Allow Ringer Off 173
- 3.7.14 Group Call Pickup 174
- System Programming 3 – 63 175
- 3.7.16 Headset Interface 176
- 3.7.17 Interactive Buttons 177
- 3.7.18 Idle Line Preference 178
- 3.7.19 Personal Ringing Tones 179
- 3.7.21 Message Wait Originate 180
- SOHVA Disable 181
- SOHVA Groups 182
- System Programming 3 – 71 183
- SOHVA Tone Burst Quantities 184
- 3.7.24 Service Observing 185
- 3.7.25 Station Disable 186
- 3.7.26 Station Name 186
- System Programming 3 – 75 187
- 3 – 76 System Programming 188
- Enable Alarm Reporting 189
- 3.7.30 Block Programming 190
- System Programming 3 – 79 191
- 3 – 80 System Programming 192
- 3.8.1 Account Code Button 193
- 3.8.3 Blank Buttons 194
- 3.8.4 Call Forward Button 195
- 3.8.5 Call Park Orbit Button 195
- 3.8.7 DSS/BLF Button 196
- 3.8.8 Line Button 197
- 3.8.9 Line Group Button 197
- 3 – 86 System Programming 198
- 3.8.12 Privacy Button 199
- 3.8.13 Save Button 199
- 3 – 88 System Programming 200
- 3.9.2 Account Code List 201
- 3 – 90 System Programming 202
- System Programming 3 – 91 203
- 3 – 92 System Programming 204
- System Programming 3 – 93 205
- 3 – 94 System Programming 206
- 3.10.2 ATI Through Dialing 207
- 3 – 96 System Programming 208
- System Programming 3 – 97 209
- 3 – 98 System Programming 210
- For Direct Department Calling 211
- System Programming 3 – 101 213
- 3.12.1 Dial Time Limit 214
- 3.12.3 DISD Assist Station 215
- 3.12.4 DISD Incoming Rings 216
- 3.13 Data Printer Service 217
- 3.14 Voice Mail Interface 218
- 3.14.1 Voice Mail Port 219
- 3 – 108 System Programming 220
- System Programming 3 – 109 221
- 3.14.3 Voice Mail Line ID 222
- System Programming 3 – 111 223
- 3.14.7 Voice Mail Pause 224
- Standard Mail Box 225
- Paging Mail Box 225
- 3.15.4 Auto Station Logon 226
- System Programming 3 – 115 227
- 3.16 Integrated Call Costing 228
- System Programming 3 – 117 229
- (201-nnnn) 230
- (1-201-201-nnnn) 231
- (1-201-nnn-nnnn) 232
- (nnn-nnnn, 1-nnn-nnnn) 233
- 3 – 122 System Programming 234
- # to clear current entry 235
- 3 – 124 System Programming 236
- System Programming 3 – 125 237
- 3 – 126 System Programming 238
- System Programming 3 – 127 239
- 3 – 128 System Programming 240
- 3.16.7 Discard Digits 241
- Dial Time Limit 242
- Answer Time Limit 242
- System Programming 3 – 131 243
- 3.17.1 Enable The SRA Feature 244
- Office Code Table 245
- Area Code Table 246
- System Programming 3 – 135 247
- 3 – 136 System Programming 248
- 3.17.4 Insert Digits For SRA 249
- 3 – 138 System Programming 250
- 3.17.6 SRA Wait Time 251
- 3 – 140 System Programming 252
- 3.18 Station Message Detail 253
- System Programming 3 – 142 254
- 3.18.3 SMDA Printout 255
- SMDA Report Printout 256
- 3.18.4 SMDR Printout 257
- System Programming 3 – 146 258
- 3.19 Toll Restriction Tables 259
- 3 – 148 System Programming 260
- # to finish entry 262
- System Programming 3 – 151 263
- 3 – 152 System Programming 264
- System Programming 3 – 153 265
- 3 – 154 System Programming 266
- 3.20.1 Preparing The System 267
- 3 – 156 System Programming 268
- System Programming 3 – 157 269
- 3 – 158 System Programming 270
- System Programming 3 – 159 271
- 3 – 160 System Programming 272
- System Programming 3 – 161 273
- 3 – 162 System Programming 274
- 3.22 The Data Interface Unit 275
- 3.22.2 Remote Data Station 276
- System Programming 3 – 165 277
- 3 – 166 System Programming 278
- System Programming 3 – 167 279
- 3 – 168 System Programming 280
- System Programming 3 – 169 281
- 3 – 170 System Programming 282
- System Records 283
- Digital Telephone System 284
- I/M/66-7 07 284
- Appendix A: 341
- Understanding The 341
- System Features 341
- Account Code Button 344
- All-Call Paging 344
- Area Paging Interface 345
- Assist Button 345
- Automatic Callback 345
- Automatic Dialing 346
- Programmable DSS/BLF 346
- Station Speed Dial 346
- System Speed Dial 346
- Automatic Hold For Intercom 347
- Automatic Pause Insertion 347
- Automatic Station Relocation 348
- Auxiliary Equipment Interface 348
- Auxiliary Ringer Interface 348
- Background Music 349
- Battery Back-Up 349
- Block Programming 350
- Call Forwarding 352
- Call Park 354
- Call Pickup 354
- Call Transfer 354
- Call Waiting Tone 355
- Caller ID 355
- Class Of Service 356
- Default Functional Program 357
- Conferencing 358
- Console Support 359
- Data Interface Unit 360
- Data Security 361
- Default Toll Restriction 361
- Delayed Ringing 362
- Dial 0 For System Attendant 362
- Dial By Name 362
- Digital Voice Announcing 363
- Night Answer Messages 364
- Recall Messages 364
- Drop Message 364
- Distinctive Ringing 370
- Do Not Disturb 370
- Dual Intercom 371
- Dynamic Line Buttons 372
- End-To-End Signaling 372
- Exclusive Hold 372
- Executive/Attendant Override 373
- External Paging Interface 373
- Feature Inhibit 373
- Flexible Ringing Assignments 373
- Handsfree Answer Inhibit 375
- Headset Capability 375
- Abandoned Hold Release 376
- I Hold And I Use Indications 377
- Idle Line Preference 378
- Impression Telephone Support 378
- Intercom Features 379
- Intercom Call Progress Tones 380
- Intercom Line Timeout 380
- Last Number Redial 381
- LCD Messaging 382
- LCD Support 382
- Line Features 383
- Line And Line Group Queuing 384
- Originating Denied 384
- Prime Line Automatic 384
- Ringing Line Preference 384
- Manual Hold 385
- Meet-Me Answer Page 385
- Messaging 385
- Message Waiting 386
- Response Messaging 386
- Station-To-Station Messaging 386
- Music Features 387
- Night Transfer (Of Ringing) 388
- On-Hook Dialing 388
- Zone Paging 389
- PBX/CENTREX/CO Compatible 390
- Personalized Ringing Tone 390
- Power Failure Transfer 391
- Private Lines (Access Denied) 392
- Programmable Buttons 392
- Pulse/Tone Switchable 393
- Redialing 394
- Ringer Volume Control 395
- Subdued Ringing 397
- Saved Number Redial 398
- Scout 900 398
- Digital Wireless Telephone 398
- Self Diagnostics 399
- Service Observing 399
- Speakerphone Support 399
- Specialized Route Access 399
- System Alarm Reports 406
- Tandem Attendant 407
- TAP (Flash/Recall) 407
- Tenant Service 407
- Timed Hold Recall 407
- Toll Restriction 408
- Toll Restriction Override 409
- Tracker Paging System 410
- Transferring Calls 410
- Transfer/Conference Button 410
- Unscreened Call Transfer 411
- Visual Voice Mail Support 411
- Voice Announce Blocking 412
- Voice Mail Support 412
- Volume Control 413
- Index – 1 415
- Index – 2 416
- Index – 3 417
- Index – 4 418
- Index – 5 419
- Index – 6 420
- Index – 7 421
- Index – 8 422
- Index – 9 423
- Index – 10 424
- Index – 11 425
- Index – 12 426
- Index – 13 427
- Index – 14 428
- Index – 15 429
- LIMITED WARRANTY 430
- LIMITATION OF LIABILITY 430
- Appendix A 432
- Quick Reference Guide 432
- Quick Reference GCA70–250 433
- 2 – Quick Reference 433
- GCA70–250 Quick Reference 434
- Quick Reference – 3 434
- 4 – Quick Reference 435
© 2020, manymanuals.com. All rights reserved. | 2.241 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals